MOT Status
ValidMileage
172,713 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing area (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing area (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front engine mounting crossmember corrosion
Offside Rear Exhaust system insecure hanger dethatched due to corrosion of tailpipe (6.1.2 (a))
Rear Exhaust has a major leak of exhaust gases tailpipe section holed (6.1.2 (a))
Central Exhaust has a minor leak of exhaust gases silencer (6.1.2 (a))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing area (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Direction indicator lens defective which has no effect on emitted light (4.4.1 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner wing area (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front engine mounting crossmember corrosion
Central Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Subframe mounting prescribed area fractured significantly reducing structural strength crossmember (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Central Brake pipe corroded, covered in grease or other material front to rear x2 (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Bonnet seriously at risk of opening inadvertently (3.1 (b) (ii)) DANGEROUS
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Obligatory mirror slightly damaged (3.3 (b) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Other passenger door hinge deteriorated so the door cannot be readily opened or closed (6.2.3 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush splitting (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bush splitting (5.3.4 (a) (i))
Nearside Rear Service brake lagging in operation (1.2.1 (d))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill area by spring anchor mount (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear crossmember by spring shackle mounting (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement bush splitting (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement bush splitting (5.3.4 (a) (i))
Power steering fluid level below minimum (2.1.5 (b) (i))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Bonnet cannot be secured in the closed position (3.1 (b) (i))
Fuel cap/sealing device ineffective (6.1.3 (b) (i))
Nearside Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))
Nearside Rear All direction indicators not working (4.4.1 (a) (ii))
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Central Integral body structure is corroded but structural rigidity is not significantly reduced n/s & o/s inner sill sections (6.1.1 (c) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Central Integral body structure is corroded but structural rigidity is not significantly reduced n/s & o/s inner sill sections (6.1.1 (c) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing splitting around tread grooves (5.2.3 (d) (ii))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Position lamp slightly affected by the operation of another lamp (4.2.3 (c))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake pipe corroded, covered in grease or other material various (1.1.11 (c))
Front Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security both inner arches (6.2.2 (d) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Inner Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security inner sill (6.2.2 (d) (i))
Offside Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security sill (6.2.2 (d) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security crossmember (6.2.2 (d) (i))
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Body has slight corrosion inner sill (6.1.B.2)
Nearside Rear Body has slight corrosion sill (6.1.B.2)
Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Body has slight corrosion inner sill (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion sill (6.1.B.2)
Offside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Front Brake pipe slightly corroded to rear (3.6.B.2c)
Nearside Body has slight corrosion inner sill (6.1.B.2)
Nearside Rear Body has slight corrosion sill (6.1.B.2)
Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Body has slight corrosion inner sill (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Body has slight corrosion sill (6.1.B.2)
Offside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Inner Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Front Inner Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Centre Rear Brake pipe excessively corroded pipe from fueltank area to loadvalve (3.6.B.2c)
Nearside Rear Inner Suspension component mounting prescribed area is fractured frame rail at bumpstop location (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is fractured frame rail at bumpstop location (2.4.A.3)
Rear registration plate deteriorated (6.3.1d)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Inner Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
Offside Front Inner Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded on axle (3.6.B.2c)
clutch pedal antislip incompleat
Brake pipe slightly corroded Various (3.6.B.2c)
No plates delaminating
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Body has slight corrosion (6.1.B.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Oil leak
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Seat belt cut but webbing not significantly weakened (5.2.2a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Service brake: efficiency below requirements (3.7.B.7)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Seat belt cut but webbing not significantly weakened (5.2.2a)
Offside Headlamp aim too low (1.8)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
end float in rear hubs
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
end float in rear hubs
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake has a slight discharge of oil (3.6.E.1)
rear hubs have slight end float
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Brake load sensing valve linkage seized (3.6.E.3)
Centre Exhaust has part of the system slightly deteriorated (7.1.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.5c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
handbrake lever travel
Brake pedal anti-slip provision incomplete (3.3.A.1b)
Horn not working (1.6.2a)
Nearside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.5c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
handbrake lever travel
Nearside Headlamp aim too low (1.8)
Nearside Registration plate lamp not working (1.1.5c)
Nearside Stop lamp not working (1.2.1b)
Offside Rear fog lamp not working (1.3.2b)
Offside Registration plate lamp not working (1.1.5c)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Lower Steering column universal joint has slight play (2.1.5)
How Reliable is the Ford Transit?
Based on 16,371,688 MOT tests across 1,454,648 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 VKL is a 2003 Ford Transit in White with a 2,402cc diesel engine. This vehicle has been through 36 MOT tests with a personal pass rate of 55.6%.
Across all 2003 Ford Transit models, the average MOT pass rate is 66.7% with a typical mileage of 108,242 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit fails its MOT is registration plate lamp not working, accounting for 551,926 recorded failures. If you're considering buying BP03 VKL, it's worth having these areas checked by a mechanic before committing.
The Ford Transit typically stays on UK roads for around 37 years. At 23 years old, this Ford Transit is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 VKL?
You can check the full history of BP03 VKL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 VKL registered?
BP03 VKL is a 2003 Ford Transit, first registered on 23 July 2003.
Is BP03 VKL safe to buy?
The MOT history for BP03 VKL shows 36 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 VKL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 VKL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.