MOT Status
ExpiredMileage
155,365 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre obviously under inflated (5.2.3 (h) (i))
general corrosion under vehicle
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Bonnet cannot be secured in the closed position (8.4.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Front Subframe mounting prescribed area is excessively corroded Corroded by both front mounts on chassis and at rear mount by off side outrigger (2.4.A.3)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working both (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively both (8.2.2)
Corrosion by rear suspension mounts
Near side front tyre worn to tread limit
Offside Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)
Rear brake compensator very stiff
Severe corrosion in rear cross member
gas blow from injector
Front Brake pad(s) modified but not seriously weakened (3.5.1n)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc Inner near side (2.5.C.1a)
Nearside Seat belt anchorage prescribed area is excessively corroded Near side sill and inner sill (5.2.6)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Registration plate lamp not working Both (1.1.C.1d)
Tyre tread depth below requirements of 1.6mm Both rear 225 40 18 w (4.1.E.1)
Front Brake pad(s) modified but not seriously weakened (3.5.1n)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside rear brake binding (3.7.B.1)
Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Inner Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Outer Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Child seat fitted not allowing full inspection of adult belt
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Inner Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Outer Front Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside outer sill corroded
offside front inner cv boot split
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Rear registration plate letter/figure incomplete (6.3.1c)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Shock absorber has slight external damage to the casing (2.7.2a)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
nearside outer sill corroded
offside front inner cv boot split
Nearside Rear Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar attachment bracket/mounting insecure (2.4.G.1)
Rear Rear wheel bearing rough when rotated (2.6.1)
Registration plate lamp not working (1.1.C.1d)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Registration plate lamp not working (1.1.5c)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Tyre has ply or cords exposed (4.1.D.1b)
Stop lamp not working (1.2.1b)
Rear Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 WEJ is a 2003 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2003 Mercedes-benz Vito models, the average MOT pass rate is 66.0% with a typical mileage of 105,209 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying BP03 WEJ, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 23 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP03 WEJ?
You can check the full history of BP03 WEJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 WEJ registered?
BP03 WEJ is a 2003 Mercedes-benz Vito, first registered on 8 July 2003.
Is BP03 WEJ safe to buy?
The MOT history for BP03 WEJ shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 WEJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 WEJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.