MOT Status
ExpiredMileage
121,750 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
both sills are corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Sub-frame corroded but not seriously weakened front and rear (5.3.3 (b) (i))
Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Inner Body has slight corrosion (6.1.B.2)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Inner Body has slight corrosion (6.1.B.2)
Registration plate lamp not working (1.1.C.1d)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner outer sill (2.4.A.3)
Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt rear (2.4.G.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded inner out sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded sill, within 30cm of rear suspension mount (2.4.A.3)
Nearside Rear Wheel nut(s) missing 1 nut (4.2.A.1e)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Suspension component mounting prescribed area is excessively corroded sill, within 30cm of rear suspension mount (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement all rear bushes (2.4.G.2)
Nearside Rear Outer Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit on 2.5mm (4.1.E.1)
offside front wheel centre cap missing + various dents, scratches + corrosion to vehicle
offside front wiper blade slight smearing
oil leak
rear wiper blade unservicable
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Rear Body has slight corrosion (6.1.B.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Body has a sharp edge caused by damage (6.1.C.1)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Registration plate lamp not working (1.1.C.1d)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Supplementary Restraint System warning lamp indicates a fault (5.4.2)
Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Offside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Body has slight corrosion (6.1.B.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Engine covers fitted obscuring some components in the engine bay
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Parking brake: efficiency below requirements (3.7.B.7)
Engine covers fitted obscuring some components in the engine bay
Child Seats Fitted To Nearside & Offside Restricting Inspection Of Seatbelts
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Lower Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front position lamp(s) not working (1.1.A.3b)
Battery Charge Low
Child Seats Fitted To Nearside & Offside Restricting Inspection Of Seatbelts
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)
Nearside Headlamp aim too low (1.8)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust system corroding in places
plastic belly pan fitted covering various components
small splits in inner side wall of nearside front tyre
various areas under vehicle and suspension components corroding
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP03 YWR is a 2003 Mazda 6 in Blue with a 1,998cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Mazda 6 models, the average MOT pass rate is 71.6% with a typical mileage of 83,392 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BP03 YWR, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 23 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP03 YWR?
You can check the full history of BP03 YWR by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP03 YWR registered?
BP03 YWR is a 2003 Mazda 6, first registered on 28 July 2003.
Is BP03 YWR safe to buy?
The MOT history for BP03 YWR shows 21 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP03 YWR have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP03 YWR. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.