MOT Status
ExpiredMileage
155,872 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake prescribed area is excessively corroded crossmember by load sensing valve (1.1.21 (e) (i))
Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member by spring mounting (5.3.6 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear cross member (5.3.6 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (ii))
Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material and offside front all pipes covered in underseal (1.1.11 (c))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front and offside front steps heavily corroded not excessive
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central silencer casing corroded
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded and offside (5.3.1 (b) (i))
Nearside Front Windscreen damaged but not adversely affecting driver's view chip in screen (3.2 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
corrosion through out under side of vehicle
welded in various places been heavily under sealed
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter panel (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill plus outrigger (6.2.2 (d) (i))
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))
Offside Front Direction indicator incorrect colour (4.4.3 (a))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wing (6.2.2 (d) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting jacking point (6.2.2 (d) (i))
Offside Rear Direction indicator incorrect colour (4.4.3 (a))
Offside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter panel (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch (6.2.2 (d) (i))
Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Coil spring corroded and offside (5.3.1 (b) (i))
Nearside Front Windscreen damaged but not adversely affecting driver's view chip in screen (3.2 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
corrosion through out under side of vehicle
exhaust corroded
Direction indicator slightly discoloured both front & o/s/r (4.4.3 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
front coil springs & top mounts corroded & top mounts tight during lock to lock
movement in drivers seat
underside of vehicle including all suspension mount points welded & heavily painted
Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Brake prescribed area fractured n/s around compensator (1.1.21 (e) (i))
Seat belt anchorage prescribed area strength or continuity significantly reduced n/s&o/s front cab floor / wheel arch (7.1.1 (a) (i))
movement in drivers seat
Direction indicator slightly discoloured both front & o/s/r (4.4.3 (a))
Front n/s&o/s top mounts corroded & tight & springs corroded
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
front chassis legs welded & heavily painted & corroded n/s/f chassis leg near radiator support corroded
n/s&o/s rear chassis legs around suspension mount points corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Macpherson strut corroded but not seriously weakened both front (5.3.3 (b) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Front Vehicle structure is deformed but structural rigidity is not significantly reduced (6.1.1 (a) (i))
Offside Rear Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
both front inner wing corroded
both front steps corroded
Nearside Front Brake prescribed area is excessively corroded n/s/f break pipe inscure (1.1.21 (e) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength subframe mount (5.3.6 (a) (i))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Coil spring corroded (5.3.1 (b) (i))
Nearside Front Direction indicator slightly discoloured (4.4.3 (a))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Direction indicator slightly discoloured (4.4.3 (a))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wing (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Steering system slightly rough top mounts (2.1.1 (a))
around metal coolant pipe damp
slight oil leak
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner wing (2.4.A.3)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive valace (2.4.A.3)
both front jacking points corroded
exhaust corroded
oil leak
n/s/f inner wing corroded
n/s/r tyre worn on inner shoulder
oil leak
exhaust corroded
front rad support mounts corroded
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front tyres worn on outer shoulders
Nearside Front Brake pipe inadequately supported hose (3.6.B.1)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded chassie (2.4.A.3)
Nearside Rear Registration plate lamp not working (1.1.C.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
both front tyres worn on outer shoulders
exhaust corroded
front rad support mounts corroded
n/s/f inner wing corroded
n/s/r tyre worn on inner shoulder
oil leak
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both front top mounts corroeded
exhaust corroeded
n/s/r inner cill corroeded
slight play in both inner steering joints
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Brake pipe inadequately supported inner wing (3.6.B.1)
Offside Front Subframe mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front coil spring corroded (2.4.C.1b)
Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front coil spring corroded (2.4.C.1b)
Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)
both front top mounts corroeded
exhaust corroeded
n/s/r inner cill corroeded
slight play in both inner steering joints
Centre Stop lamp not working (1.2.1b)
Nearside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Stop lamp not working (1.2.1b)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Stop lamp not working (1.2.1b)
Offside Stop lamp not working (1.2.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear wheel cylinder leaking (3.6.A.1)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside rear brake recording little or no effort (3.7.B.5a)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside front brake grabbing slightly (3.7.A.2b)
3 exhaust rubbers splitting
front pads very low
ns blade split
How Reliable is the Peugeot Boxer?
Based on 1,709,897 MOT tests across 147,582 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP05 EYA is a 2005 Peugeot Boxer in White with a 1,997cc diesel engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2005 Peugeot Boxer models, the average MOT pass rate is 73.1% with a typical mileage of 42,538 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Boxer fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 25,662 recorded failures. If you're considering buying BP05 EYA, it's worth having these areas checked by a mechanic before committing.
The Peugeot Boxer typically stays on UK roads for around 31 years. At 21 years old, this Peugeot Boxer is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP05 EYA?
You can check the full history of BP05 EYA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP05 EYA registered?
BP05 EYA is a 2005 Peugeot Boxer, first registered on 18 July 2005.
Is BP05 EYA safe to buy?
The MOT history for BP05 EYA shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP05 EYA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP05 EYA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.