2005 Ford Focus

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear exhaust mount broken.

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Nearside Windscreen wiper not working (3.4 (a))

Offside Front Direction indicator not working (4.4.1 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Windscreen wiper not working (3.4 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear exhaust mount broken.

Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))

Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))

Undertray likely to become detached (6.2.1 (a) (ii)) DANGEROUS

Power steering rack leaking

Subframe mounting prescribed area is corroded but not considered excessive Rear sills (2.4.A.3)

Tyre worn close to the legal limit Both front and nearside rear (4.1.E.1)

Power steering component(s) has slight seepage from a component rack (2.3.3b)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

power steering rack slight leak

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

wheel nuts are not visable

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

wheel nuts are not visable

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

wheel nuts are not visable

Engine covers fitted obscuring some components in the engine bay

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Under-trays fitted obscuring some underside components

Front Brake pad(s) wearing thin (3.5.1g)

front brake discs worn

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Tyre worn close to the legal limit (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)