MOT Status
ValidMileage
154,147 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i))
Offside Front Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength both sides (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Nearside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all over (6.1.1 (c) (i))
Central Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Rear Rear fog lamp not working (4.5.1 (a) (ii))
Nearside Front Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS
Offside Rear Brake hose leaking on a hydraulic braking system (1.1.12 (c) (ii)) DANGEROUS
Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Nearside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Position lamp has a product on the lens or light source which obviously reduces light intensity (4.2.3 (b) (i))
Offside Front Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Front Suspension component corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all over (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Rear Suspension arm corroded but not seriously weakened both sides (5.3.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Suspension component corroded but not seriously weakened all (5.3.3 (b) (i))
exhaust system corroded
underbody surface corrosion
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear tail gate damaged
Rear valance/boot floor damaged
Front Registration plate missing (0.1 (a))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Rear Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i))
Rear Registration plate missing (0.1 (a))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear Brake disc worn, pitted or scored, but not seriously weakened both sides (1.1.14 (a) (ii))
Rear tail gate damaged
Rear valance/boot floor damaged
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
nsf suspension arm front bush has slight movement.
Offside Front Front position lamp(s) not working (1.1.A.3b)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Mazda 3?
Based on 2,040,939 MOT tests across 164,053 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP07 APY is a 2007 Mazda 3 in Blue with a 1,598cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 68%.
Across all 2007 Mazda 3 models, the average MOT pass rate is 74.7% with a typical mileage of 68,986 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 3 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 40,716 recorded failures. If you're considering buying BP07 APY, it's worth having these areas checked by a mechanic before committing.
The Mazda 3 typically stays on UK roads for around 22 years. At 19 years old, this Mazda 3 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP07 APY?
You can check the full history of BP07 APY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP07 APY registered?
BP07 APY is a 2007 Mazda 3, first registered on 3 August 2007.
Is BP07 APY safe to buy?
The MOT history for BP07 APY shows 25 tests with a 68% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP07 APY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP07 APY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.