MOT Status
ExpiredMileage
119,247 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing cracking or perishing (5.2.3 (d) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge low in centre and worn smooth on inner edge advise replace (5.2.3 (e))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing cracking or perishing (5.2.3 (d) (ii))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Lower Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge low in centre and worn smooth on inner edge advise replace (5.2.3 (e))
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS
Front Anti-roll bar linkage ball joint dust cover severely deteriorated both (5.3.4 (b) (i))
Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front tyres 3mm tread depth (205/55/16 V)
emissions too lean for results
How Reliable is the Kia Ceed?
Based on 1,665,385 MOT tests across 147,843 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP12 CNC is a 2012 Kia Ceed in Silver with a 1,582cc diesel engine. This vehicle has been through 12 MOT tests with a personal pass rate of 75%.
Across all 2012 Kia Ceed models, the average MOT pass rate is 74.0% with a typical mileage of 66,761 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Kia Ceed fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 17,111 recorded failures. If you're considering buying BP12 CNC, it's worth having these areas checked by a mechanic before committing.
The Kia Ceed typically stays on UK roads for around 19 years. At 14 years old, this Kia Ceed is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP12 CNC?
You can check the full history of BP12 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP12 CNC registered?
BP12 CNC is a 2012 Kia Ceed, first registered on 6 August 2012.
Is BP12 CNC safe to buy?
The MOT history for BP12 CNC shows 12 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP12 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP12 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.