MOT Status
ExpiredMileage
121,226 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b))
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch full area (6.1.1 (c) (i))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch full area (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Exhaust heat shield loose x2
Front Tyre worn close to legal limit/worn on edge Both sides edges worn (5.2.3 (e))
Inner and outer sills corroded
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Rear Exhaust mounting defective (6.1.2 (a))
Rear subframe and rear springs corroded
Both rear inner arches have areas of corrosion
Both rear inner sills corroded
Heat shields loose
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear arms, subframes, mountings and springs all corroded
Seepage of oil on steering rack
Both rear coil springs corroded
Both rear inner arches corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Handbrake travel not too excess
Heavily corroded/painted suspension across rear (arms, sills)
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside outer sill corroded
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Horn not working (7.7 (a))
Nearside Rear Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Both rear coil springs corroded
Both rear inner arches corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Handbrake travel not too excess
Heat shield loose
Heavily corroded/painted suspension across rear (arms, sills)
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Rear Outer Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Stop lamp(s) insecure (4.3.1 (c) (i))
Offside outer sill corroded
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Exhaust mounting defective (6.1.2 (a))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe slightly damaged (1.1.11 (c))
Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe slightly damaged (1.1.11 (c))
Nearside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Front Exhaust mounting defective (6.1.2 (a))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Nearside rear tyre tread perishing
Rear trailing arm bushes deteriorated
Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)
Nearside Front coil spring corroded (2.4.C.1b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Horn not working (1.6.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Front coil spring broken (2.4.C.1a)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear tyre side wall cracking
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front coil spring broken (2.4.C.1a)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
engine light on
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Ford Focus?
Based on 28,316,889 MOT tests across 2,072,617 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP52 HWK is a 2003 Ford Focus in Green with a 1,596cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 75%.
Across all 2003 Ford Focus models, the average MOT pass rate is 71.1% with a typical mileage of 70,585 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Focus fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,055,468 recorded failures. If you're considering buying BP52 HWK, it's worth having these areas checked by a mechanic before committing.
The Ford Focus typically stays on UK roads for around 27 years. At 23 years old, this Ford Focus is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BP52 HWK?
You can check the full history of BP52 HWK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP52 HWK registered?
BP52 HWK is a 2003 Ford Focus, first registered on 31 January 2003.
Is BP52 HWK safe to buy?
The MOT history for BP52 HWK shows 24 tests with a 75% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP52 HWK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP52 HWK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.