2005 Ford Focus

Emissions unable to be completed due to exhauste snaped (8.2.1.2 (d))

Front Registration plate inscription illegible damaged (0.1 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Rear Exhaust system insecure snaped (6.1.2 (a))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Rear surface corroded

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear surface corroded

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear surface corroded

Nearside Front Inner Tyre slightly damaged/cracking or perishing wall (5.2.3 (d) (ii))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Rear surface corroded

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear surface corroded

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear surface corroded

Nearside Brake pipe slightly corroded rear section of front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Brake pipe slightly corroded rear section of front to rear (3.6.B.2c)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Front Wheel nut(s) missing (4.2.A.1e)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear Wheel nut(s) missing (4.2.A.1e)

Offside Front Wheel nut(s) missing (4.2.A.1e)

Offside Rear Wheel nut(s) missing (4.2.A.1e)

Nearside Brake pipe slightly corroded rear section of front to rear (3.6.B.2c)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside front brake fluctuating, but not excessively (3.7.B.3)

Offside Brake pipe slightly corroded rear section of front to rear (3.6.B.2c)

Offside front brake fluctuating, but not excessively (3.7.B.3)

Nearside Headlamp aim too low (1.8)

Both front tyres cracking

Brake hose has slight corrosion to ferrules Front and rear (3.6.B.4e)

Brake pipe slightly corroded Underside (3.6.B.2c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front number plate cracked

Fuel pipes corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

No visible locking devices on calipers

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive Both rear chssis legs and inner sills (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

coil spring corroded Both front and rear (2.4.C.1b)

Nearside Rear Tyre(s) incorrect because tyres with different aspect ratios are fitted on the same axle. (4.1.A.1a)

Both front tyres cracking

Brake hose has slight corrosion to ferrules Front and rear (3.6.B.4e)

Brake pipe slightly corroded Underside (3.6.B.2c)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Front number plate cracked

Fuel pipes corroded

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

No visible locking devices on calipers

Rear Suspension arm corroded but not seriously weakened (2.4.G.1)

Suspension component mounting prescribed area is corroded but not considered excessive Both rear chssis legs and inner sills (2.4.A.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

coil spring corroded Both front and rear (2.4.C.1b)

rear lower suspension arms becoming rusty

Centre Obligatory mirror missing (8.1.1)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Engine managment light on

Items removed from driver's view prior to test

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Headlamp aim too high and too far to the right. (1.8)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Power steering fluid level below minimum (2.3.1)

Engine managment light on

Items removed from driver's view prior to test

Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)

Rear Brake pad(s) wearing thin (3.5.1g)

steering rack slightly worn

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Road wheel slightly damaged (4.2.A.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Rear Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Rear Shock absorber has a slightly reduced damping effect (2.7.5)