MOT Status
ExpiredMileage
137,390 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Front Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Brake hydraulic reservoir close to minimum mark (1.1.10 (d) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis rail (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
Offside Rear Subframe mounting prescribed area is excessively corroded chassis (2.4.A.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Rear coil spring broken (2.4.C.1a)
Offside Stop lamp not working (1.2.1b)
Nearside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Upper Shock absorber has a slightly worn shock absorber pivot (2.7.4)
Offside Inner Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BP55 JGV is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BP55 JGV, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BP55 JGV?
You can check the full history of BP55 JGV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BP55 JGV registered?
BP55 JGV is a 2006 Ford Ka, first registered on 31 January 2006.
Is BP55 JGV safe to buy?
The MOT history for BP55 JGV shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BP55 JGV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BP55 JGV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.