2008 Toyota Prius

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Headlamp aim too high (4.1.2 (a))

Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Suspension rod pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Slightly corrosion under neath

Front Suspension arm pin or bush worn but not resulting in excessive movement both. (5.3.4 (a) (i))

Items removed from driver's view prior to test ()

slight corrosion underneath.

Front Inner Tyre worn close to legal limit/worn on edge both sides. (5.2.3 (e))

Front Suspension arm pin or bush worn but not resulting in excessive movement BOTH SIDES. (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened both sides. (1.1.14 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

slight corrosion underneath the vehicle.

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Emissions not registered (HYBRID)

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Road wheel slightly damaged outer (4.2.A.1a)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Engine Light On

Engine Light On

Rear Brake pad(s) less than 1.5 mm thick Both (3.5.1g)

EML light on indicate an engine fault

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Rear Brake pad(s) wearing thin both sides (3.5.1g)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)

EML light on indicate an engine fault

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Rear Brake pad(s) wearing thin both sides (3.5.1g)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

eml

n/s rear tyre has parish

Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

eml

n/s rear tyre has parish

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Front position lamp(s) not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Seat belt stitching slightly frayed (5.2.2b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp aim too high (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Seat belt stitching slightly frayed (5.2.2b)