MOT Status
ExpiredMileage
140,887 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve seized (3.6.E.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Side repeater incorrect colour (1.4.A.2f)
Nearside Stop lamp not working (1.2.1b)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Side repeater incorrect colour (1.4.A.2f)
Registration plate lamp not working (1.1.C.1d)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)
Rear Brake load sensing valve stiff (3.6.E.3)
front exhaust slightly deteriorsted
rear silencer corroded
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Registration plate lamp not working (1.1.C.1d)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Coolant leak
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Coolant leak
Front Brake pad(s) wearing thin (3.5.1g)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Side repeater slightly discoloured (1.4.A.2f)
front brake discs corroded and lipped
rear number plate going discoloured
suspect crankshaft pulley very noisey
Horn not working (1.6.2a)
Indicator switch faulty (1.4.A.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Offside Side repeater slightly discoloured (1.4.A.2f)
o/s/front inner wheel rim has slight damage
rear number plate going discoloured
Exhaust emits an excessive level of metered smoke for a non-turbo charged engine (7.4.B.3b)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT02 MFA is a 2002 Peugeot 206 in Green with a 1,997cc diesel engine. This vehicle has been through 14 MOT tests with a personal pass rate of 57.1%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BT02 MFA, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BT02 MFA?
You can check the full history of BT02 MFA by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT02 MFA registered?
BT02 MFA is a 2002 Peugeot 206, first registered on 24 June 2002.
Is BT02 MFA safe to buy?
The MOT history for BT02 MFA shows 14 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT02 MFA have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT02 MFA. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.