MOT Status
ExpiredMileage
112,421 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Front wing slight damage
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Offside Front Brake pipe excessively corroded inner wing (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Rear Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Front wing slight damage
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Front wing damaged but leaving no sharp edges or projections
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))
Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Brake pipe corroded, covered in grease or other material axle (1.1.11 (c))
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
car went to extended emissions test
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Fuel system component leaking fouling suspension drivers rear (7.2.3)
Offside Front constant velocity joint is insecure (2.5.C.1b)
Registration plate lamp not working (1.1.C.1d)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Front Tie bar/rod ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
indicator stalk sloppy advise replacement
indicator stalk faulty advise replacement.
Driver's seat insecure (6.2.A.1)
headlamp/indicator control stalk switch faulty,recommend renewal of stalk
hazard switch faulty
Brake load sensing valve linkage seized (3.6.E.3)
Brake pedal spongy (3.3.B.1b)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside rear brake binding (3.7.B.1)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
hazard switch faulty
Brake load sensing valve linkage seized (3.6.E.3)
rear number plate slightly defaced
Offside Rear Brake load sensing valve linkage seized (3.6.E.3)
Offside rear brake recording little or no effort (3.7.B.5a)
Brake load sensing valve linkage seized (3.6.E.3)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Upper Anti-roll bar has slight play in a pin/bush (2.4.G.2)
oil leak
rear brake application uneven (3.7.B.2)
Nearside Front Upper Anti-roll bar has slight play in a pin/bush (2.4.G.2)
oil leak
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT02 SDU is a 2002 Peugeot 206 in Green with a 1,360cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BT02 SDU, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BT02 SDU?
You can check the full history of BT02 SDU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT02 SDU registered?
BT02 SDU is a 2002 Peugeot 206, first registered on 21 June 2002.
Is BT02 SDU safe to buy?
The MOT history for BT02 SDU shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT02 SDU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT02 SDU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.