2002 Peugeot 206

Front Brake pad(s) wearing thin both sides (1.1.13 (a) (ii))

Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake load sensing valve stiff (1.1.17 (c) (i))

Parking brake lever defective but can be satisfactorily operated travel (1.1.6 (d))

osr bumper held on by tape

Rear Exhaust system not adequately supported (7.1.1)

osr bumper held on by tape

Brake load sensing valve seized (3.6.E.3)

Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Direction indicators incorrect colour (1.4.A.2f)

Offside Rear Direction indicators incorrect colour (1.4.A.2f)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brake load sensing valve seized (3.6.E.3)

Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Rear fog lamp excessively damaged so that it is not visible from a reasonable distance (1.3.2d)

Rear fog lamp not working (1.3.2b)

Fuel tank insecure (7.2.1)

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Rear Brake load sensing valve seized (3.6.E.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Nearside Front Headlamp aim too low (1.8)

Offside Front Headlamp aim too low (1.8)

Parking brake lever has little reserve travel (3.1.6b)

Parking brake lever has little reserve travel (3.1.6b)

Nearside Headlamp aim too low (1.8)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Stop lamp not working (1.2.1b)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Rear Parking brake lever has no reserve travel (3.1.6b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Exhaust has part of the system excessively deteriorated (7.1.1a)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Headlamp aim too high (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake load sensing valve linkage stiff (3.6.E.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Brake load sensing valve linkage stiff (3.6.E.3)