MOT Status
ExpiredMileage
78,415 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Parking brake lever has little reserve travel (3.1.6b)
Battery insecure (1.9.1)
Offside Front Anti-roll bar has excessive play in a ball joint (2.4.G.2)
Offside Front Lower Suspension arm has excessive play in a pin/bush (2.4.G.2)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Front Shock absorber has a light misting of oil (2.7.3)
Parking brake lever has little reserve travel (3.1.6b)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Service brake: efficiency below requirements (3.7.B.7) DANGEROUS
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Macpherson strut corroded but not seriously weakened (2.4.G.1)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Oil leak
Parking brake lever has little reserve travel (3.1.6b)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Outer Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear Brake load sensing valve seized (3.6.E.3)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
rear wiper blade split
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Registration plate lamp not working (1.1.C.1d)
front discs corroded
slight play in o/s f drop link
Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
exhaust corroded
front brake discs corroded
front wipers poor
exhaust corroded
front brake discs corroded
front wipers poor
Nearside Side repeater incorrect colour (1.4.A.2f)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
front discs lipped
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)
Offside Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.B2)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT03 HFJ is a 2003 Peugeot 206 in Red with a 1,124cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 52.6%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BT03 HFJ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BT03 HFJ?
You can check the full history of BT03 HFJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT03 HFJ registered?
BT03 HFJ is a 2003 Peugeot 206, first registered on 30 May 2003.
Is BT03 HFJ safe to buy?
The MOT history for BT03 HFJ shows 19 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT03 HFJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT03 HFJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.