MOT Status
ExpiredMileage
99,014 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Rear fog lamp not working (1.3.2b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
slight surface corrosion on underneath
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Front coil spring fractured (2.4.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Nearside rear brake binding (3.7.B.1)
Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside rear brake binding (3.7.B.1)
Nearside Front Direction indicator not working (1.4.A.2c)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Registration plate lamp not working (1.1.C.1d)
drivers mirror broken
neasrside wishbone bush starting tyo split
Driver's seat insecure (6.2.A.1)
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Macpherson strut has excessive movement at the upper attachment (2.5.A.1c)
Offside Headlamp aim aimed so that it dazzles other road users (1.8.A.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Registration plate lamp not working (1.1.C.1d)
both wishbone bushes starting to split
nearside front wheel rim dented
Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
slight play in a/r bushes
slight play in front top kits
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear coil spring fractured (2.4.C.1a)
Offside Rear coil spring fractured (2.4.C.1a)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT03 UTL is a 2003 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 15 MOT tests with a personal pass rate of 53.3%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BT03 UTL, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT03 UTL?
You can check the full history of BT03 UTL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT03 UTL registered?
BT03 UTL is a 2003 Ford Ka, first registered on 30 May 2003.
Is BT03 UTL safe to buy?
The MOT history for BT03 UTL shows 15 tests with a 53.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT03 UTL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT03 UTL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.