2003 Ford Ka

Front Brake pedal has no servo assistance (3.3.B.2)

Front Brake pedal spongy (3.3.B.1b)

Front Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil holed as marked (6.1.B.2)

Nearside Front Inner Suspension arm rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil holed as marked (6.1.B.2)

Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sil holed as marked (6.1.B.2)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Front Lower Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt droplink (2.4.G.2)

Offside Front Lower coil spring broken (2.4.C.1a)

Offside Front Upper Anti-roll bar ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt droplink (2.4.G.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Front Headlamp aim too low (1.8)

Nearside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Lower Body has slight corrosion sil (6.1.B.2)

Offside Rear Lower Body has slight corrosion (6.1.B.2)

Offside Rear Trailing arm rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Inner Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Coil spring not correctly located (2.4.C.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Offside Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Body has slight corrosion (6.1.B.2)

Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Oil leak

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Offside Front coil spring incomplete (2.4.C.1a)

Brake hydraulic reservoir fluid close to minimum level (3.6.G.1b)

Front Brake pad(s) wearing thin (3.5.1g)

Nail in nearside rear tyre

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Oil leak

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Front Headlamp aim too low (1.8)

Nearside Rear coil spring cracked (2.4.C.1a)

Offside Rear coil spring cracked (2.4.C.1a)

Nearside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)

Nearside Front coil spring cracked (2.4.C.1a)

Offside Rear Registration plate lamp not working (1.1.5c)

Offside Front Macpherson strut has slight movement in the upper support bearing assembly (2.5.B.1b)

Offside Rear Brake hose leaking (3.6.A.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)