MOT Status
ExpiredMileage
108,736 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt rear (2.4.G.2)
Nearside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Front Inner brake disc in such a condition that it is seriously weakened (3.5.1i)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Stop lamp not working (1.2.1b)
Offside Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Suspension arm corroded but not seriously weakened (2.4.G.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Power steering component(s) has slight seepage from a component (2.3.3b)
under trays fitted
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear joint (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt rear joint (2.4.G.2)
Child seat fitted not allowing full inspection of adult belt
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both inner sills have surface corrosion
rear subframe has surface corrosion
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both inner sills have surface corrosion
rear subframe has surface corrosion
Exhaust rusty on joints
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both sills rusty in patches
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Headlamp aim too high (1.8)
Nearside Headlamp aim too low (1.8)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT05 LLO is a 2005 Mazda 6 in Grey with a 1,998cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 2005 Mazda 6 models, the average MOT pass rate is 72.4% with a typical mileage of 77,324 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BT05 LLO, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 21 years old, this Mazda 6 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BT05 LLO?
You can check the full history of BT05 LLO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT05 LLO registered?
BT05 LLO is a 2005 Mazda 6, first registered on 31 May 2005.
Is BT05 LLO safe to buy?
The MOT history for BT05 LLO shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT05 LLO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT05 LLO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.