MOT Status
ExpiredMileage
97,577 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal front wheel arches both sides (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both rear chassis extensions corroded
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch various places (5.3.6 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg under bonnet (6.1.1 (c) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i))
Nearside Rear Inner Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering chassis leg inner arch various places (6.1.1 (c) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Suspension component mounting repair covered in underseal front wheel arches both sides (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
both rear chassis extensions corroded
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount chassis extension (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced body extension (6.1.1 (c) (i))
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Suspension component mounting repair covered in underseal both front inner wheel arches (5.3.6 (a) (i))
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Oil leaking excessively from engine (8.4.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive spring mount chassis extension (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced body extension (6.1.1 (c) (i))
Rear Vehicle structure is repaired but structural rigidity is not significantly reduced (6.1.1 (d) (i))
Suspension component mounting repair covered in underseal both front inner wheel arches (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive at all rear spring hangers (5.3.6 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch in various places (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch in various places (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind wheels (6.1.1 (c) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner rail (6.1.1 (c) (i))
Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced all (6.1.1 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Parkbrake efficiency requirement only just met
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to step joint (7.1.1 (a) (i))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in engine bay (6.1.1 (c) (i))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced rear of cab (7.1.1 (a) (i))
Offside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill to step area (7.1.1 (a) (i))
Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear cross member over axle both sides (6.1.1 (c) (i))
Parkbrake efficiency requirement only just met
Parking brake efficiency requirement only just met adjustment or repair may be required
Headlamp aim too low Both sides (4.1.2 (a))
Nearside Rear Outline marker lamp not working (4.2.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Parking brake efficiency requirement only just met adjustment or repair may be required
Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Seat belt damaged (7.1.2 (b) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Outline marker lamp not working (4.2.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brakes imbalanced across an axle 34% (3.7.B.5b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear Brakes imbalanced across an axle 45% (3.7.B.5b)
rear parking (secondary) brakes imbalanced (3.7.B.6b)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Front Brakes imbalanced across an axle (3.7.B.5b)
Horn not working (1.6.2a)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Stop lamp not working (1.2.1b)
Nearside front brake binding (3.7.B.1)
Offside Headlamp aim too high (1.8)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Service brake: efficiency below requirements (3.7.B.7)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
Front Tyre worn close to the legal limit (4.1.E.1)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Headlamp aim too high and too far to the left. (1.8)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Steering system has slight free play detected at steering wheel (2.2.A.1b)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
centre exhaust clamp loose but no exhaust leak
rear brake application uneven (3.7.B.2)
Nearside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
centre exhaust clamp loose but no exhaust leak
How Reliable is the Ford Transit?
Based on 16,371,688 MOT tests across 1,454,648 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT05 MKK is a 2005 Ford Transit in White with a 2,402cc diesel engine. This vehicle has been through 29 MOT tests with a personal pass rate of 58.6%.
Across all 2005 Ford Transit models, the average MOT pass rate is 67.5% with a typical mileage of 101,296 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Transit fails its MOT is registration plate lamp not working, accounting for 551,926 recorded failures. If you're considering buying BT05 MKK, it's worth having these areas checked by a mechanic before committing.
The Ford Transit typically stays on UK roads for around 37 years. At 21 years old, this Ford Transit is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT05 MKK?
You can check the full history of BT05 MKK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT05 MKK registered?
BT05 MKK is a 2005 Ford Transit, first registered on 18 July 2005.
Is BT05 MKK safe to buy?
The MOT history for BT05 MKK shows 29 tests with a 58.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT05 MKK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT05 MKK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.