MOT Status
ValidMileage
115,053 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/floor (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
surface corrosion throughout under side
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/floor (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))
Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Axle swivel pins and bushes swivel pin and/or bush slightly worn (5.1.2 (b) (i))
Offside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))
Offside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))
Oil leak, but not excessive (8.4.1 (a) (i))
surface corrosion throughout under side
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
surface corrosion throughout under side
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Exhaust carbon monoxide content at idle exceeds manufacturer's specified limits (8.2.1.2 (b))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill/suspension mounting (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
surface corrosion throughout under side
Front Exhaust has a minor leak of exhaust gases flexy (6.1.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill {front to centre ] (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch by sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength centre to rear floor (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Power steering pipe/hose slightly corroded (2.1.5 (g) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
surface corrosion on under side
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill/suspension mounting/seat belt anchorage (6.1.1 (c) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill/sus mounting,seat belt anchorage (6.1.1 (c) (i))
surface corrosion throughout under side
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Axle has excessive vertical movement between stub axle and axle beam such that directional stability is impaired (5.1.2 (c) (ii)) DANGEROUS
Front Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps dipswitch faulty, lights staying on (1.7.4b)
Front Windscreen wiper does not clear the windscreen effectively both wipers (8.2.2)
Nearside Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings sill area welded incorrectly (6.1.B.2)
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc both boots on offside driveshaft (2.5.C.1a)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill area is corroded (6.1.B.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Rear registration plate insecure (6.3.1b)
Nearside Front coil spring broken (2.4.C.1a) DANGEROUS
Front coolant level low
Central Front Oil leak around oil filter ()
Front Bumper insecure partially insecure ()
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Body has slight corrosion floor corner slightly corroded (6.1.B.2)
Offside Front Body has slight corrosion floor corner slightly corroded (6.1.B.2)
Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
Parking brake lever has little reserve travel (3.1.6b)
Rear coil spring corroded both rear springs (2.4.C.1b)
Rear slight damage to rear panel of vehicle, under bumper
Tyre worn close to the legal limit all tyres getting close to wear limits (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Body has slight corrosion (6.1.B.2)
Front coil spring corroded (2.4.C.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear coil spring corroded (2.4.C.1b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front coil spring incomplete (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre worn close to the legal limit (4.1.E.2a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT06 CGO is a 2006 Ford Ka in Black with a 1,297cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BT06 CGO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT06 CGO?
You can check the full history of BT06 CGO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT06 CGO registered?
BT06 CGO is a 2006 Ford Ka, first registered on 20 June 2006.
Is BT06 CGO safe to buy?
The MOT history for BT06 CGO shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT06 CGO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT06 CGO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.