MOT Status
ExpiredMileage
52,973 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Upper Shock absorbers has a slightly worn bush (5.3.2 (c))
Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
various areas of corrosion
Horn not working (7.7 (a) (ii))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
various areas of corrosion
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
engine and under body covers
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
engine and under body covers
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
engine and under body covers
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced seat belt anchorage support panel (7.1.1 (a) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced and outer sills holed and badly coroded (7.1.1 (a) (i))
Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()
engine and under body covers
engine and under body covers
Both front tyres wearing inner edges
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Nearside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)
Both front tyres wearing inner edges
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Road wheel slightly damaged (4.2.A.1a)
Offside Front Front suspension has excessive movement at a wishbone pin or bush (2.5.A.1c)
Engine covers fitted obscuring some components in the engine bay
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Under-trays fitted obscuring some underside components
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Engine covers fitted obscuring some components in the engine bay
Offside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Under-trays fitted obscuring some underside components
o/s/r tyre sidewall perished
Offside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside rear brake binding (3.7.B.1)
Offside Front Lower Radius arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp aim too low (1.8)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
both rear tyre side walls starting to crack
parking brake travel high
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT06 GGE is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BT06 GGE, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT06 GGE?
You can check the full history of BT06 GGE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT06 GGE registered?
BT06 GGE is a 2006 Ford Ka, first registered on 7 August 2006.
Is BT06 GGE safe to buy?
The MOT history for BT06 GGE shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT06 GGE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT06 GGE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.