MOT Status
ValidMileage
185,596 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Headlamp aim projected beam image is obviously incorrect both (4.1.2 (c))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Windscreen washer not working (3.5 (a))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Rear Shock absorbers has light misting of oil (5.3.2 (b))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Headlamp aim too low (4.1.2 (a))
Offside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Front Windscreen washer not working (3.5 (a))
Nearside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Front Anti-roll bar linkage pin or bush excessively worn D bush (5.3.4 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Front position lamp(s) not working both (1.1.A.3b)
Stop lamp not working both (1.2.1b)
Central Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Stop lamp not working (1.2.1b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
offside front tyre worn on inner edge
nearside rear tyre wearing on inner edge
Front Anti-roll bar has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Subaru Legacy?
Based on 349,986 MOT tests across 31,204 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT06 PNZ is a 2006 Subaru Legacy in Blue with a 1,994cc petrol engine. This vehicle has been through 27 MOT tests with a personal pass rate of 66.7%.
Across all 2006 Subaru Legacy models, the average MOT pass rate is 74.3% with a typical mileage of 85,500 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Subaru Legacy fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 11,876 recorded failures. If you're considering buying BT06 PNZ, it's worth having these areas checked by a mechanic before committing.
The Subaru Legacy typically stays on UK roads for around 35 years. At 20 years old, this Subaru Legacy is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT06 PNZ?
You can check the full history of BT06 PNZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT06 PNZ registered?
BT06 PNZ is a 2006 Subaru Legacy, first registered on 21 June 2006.
Is BT06 PNZ safe to buy?
The MOT history for BT06 PNZ shows 27 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT06 PNZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT06 PNZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.