2006 Mazda 3

Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))

Offside Front Windscreen washer not working (3.5 (a))

Rear Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm 195 65 15 (5.2.3 (e)) DANGEROUS

Offside Front Lower Suspension arm ball joint likely to become detached (5.3.4 (a) (ii)) DANGEROUS

Offside Front Tyre tread pattern not visible over the whole tread area when minimum depth required is 1.0mm 195 65 15 (5.2.3 (e)) DANGEROUS

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Coil spring corroded (5.3.1 (b) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Tyre slightly damaged/cracking or perishing Both rear (5.2.3 (d) (ii))

Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Nearside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush excessively worn Rear bush (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Under-trays fitted obscuring some underside components

Nearside Rear coil spring incomplete (2.4.C.1a)

Engine covers fitted obscuring some components in the engine bay

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front coil spring corroded (2.4.C.1b)

Under-trays fitted obscuring some underside components

Nearside Rear Braking system leaking (3.6.A.1)