2012 Nissan Navara

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Front Exhaust has a minor leak of exhaust gases flexi (6.1.2 (a))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Towball/hitch not fitted at time of test Pin missing ()

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Towball/hitch not fitted at time of test Pin missing ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Brake drum contaminated (1.1.14 (b))

Nearside Rear Brake lining(s) contaminated (1.1.13 (b))

Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Shock absorbers has a slightly worn bush (5.3.2 (c))

Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

parking brake only just met requirements (16%)-little effort on nearside

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Towball/hitch not fitted at time of test pin not fitted ()

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Nearside Rear Service brake grabbing severely (1.2.1 (c))

Offside Front Lower Suspension component ball joint has slight play (5.3.4 (a) (i))

Towball/hitch not fitted at time of test pin not fitted ()

Offside Front Play in steering rack inner joint(s) ()

Front Lower Suspension arm ball joint excessively worn Both (5.3.4 (a) (i))

Nearside Rear Service brake excessively binding (1.2.1 (f))

Nearside Front and offside front brake discs worn

Nearside Front and offside front brake discs worn

Offside Rear Direction indicator incorrect colour (4.4.3 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Lower Suspension arm ball joint has slight play Both (5.3.4 (a) (i))

Rear Wheel bearing has slight play Both (5.1.3 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened Both (1.1.14 (a) (ii))

Front Lower Suspension arm ball joint has slight play Both (5.3.4 (a) (i))

Nearside Headlamp aim too high Adjusted (4.1.2 (a))

Offside Headlamp aim too high and too far to the left. Adjusted (4.1.2 (a))

Rear Wheel bearing has slight play Both (5.1.3 (a) (i))

Engine covers fitted obscuring some components in the engine bay

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Under shield fitted obscuring some underside components