2001 Peugeot 206

Brake load sensing valve defective and function impaired (3.6.E.3)

Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)

Brakes imbalanced across an axle (3.7.B.5b)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Stop lamp adversely affected by the operation of another lamp (1.2.1f)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Service brake: efficiency below requirements (3.7.B.7)

1 rear brake pipe slightly corroded

aux belt poor

both front lower arm bushes borderline

both wiper blades poor

corrosion on underside

front suspension struts/mounts/springs and pick up points corroded

n/s jet poor

n/s/r no plate lamp cover missing

oil leak

rear seat back poorly secured

slight dampness on power steering rack/pipes

strut bearings siezing

tail pipe corroded

brake pipe from compensator to o/s/r slightly corroded

cracking in o/s/r tyre

dampness around steering rack

exhaust corroded

n/s no plate lamp cover missing

n/s/f strut bearing siezing

rear seat back locking on 1 side only

Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Spare wheel insecure (6.4.2)

Track rod end ball joint has excessive play (2.2.B.1f)

brake pipe from compensator to o/s/r slightly corroded

cracking in o/s/r tyre

dampness around steering rack

exhaust corroded

n/s no plate lamp cover missing

n/s/f strut bearing siezing

rear seat back locking on 1 side only

dip stick req

exhaust corroded

o/s rear seat back clamp in op

slight corrosion on brake pipe

slight wear in anti roll bar link

slight wear in cv joint

slight wear in track rod ends

strut bearings siezing

Brake pipe excessively corroded (3.6.B.2c)

Brake pipe excessively corroded (3.6.B.2c)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front wheel bearing rough when rotated (2.5.A.2)

Position lamp switch insecure (1.1.A.1)

Power steering component(s) leaking (2.3.3b)

Brake pedal has insufficient reserve movement (3.3.A.5) DANGEROUS

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Front Front constant velocity joint is slightly worn (2.5.C.1b)

Nearside Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

dipstick req

rear seatback o/s camp not working

slight wear in both track rod ends

strut bearings siezing

Engine cable tray broken

Both strut bearings siezing slightly

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Trace of oil leak in steering rack area

Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)

Brake pipe slightly corroded (3.6.B.2c)

Engine cable tray broken

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Trace of oil leak in steering rack area

both front strut bearings starting to sieze

cover missing n/s number plate lamp

front pads and discs worn approx 2000 miles left

indicator stalk quite loose

most metal brake pipes starting to corrode may need done for next mot

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Windscreen wiper blade insecure (8.2.2)

Offside Rear Seat belt locking mechanism does not secure or release (5.2.5a)

Offside Registration plate lamp not working (1.1.5c)

Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

both front strut bearings starting to sieze

cover missing n/s number plate lamp

front pads and discs worn approx 2000 miles left

indicator stalk quite loose

most metal brake pipes starting to corrode may need done for next mot

n/s/f anti roll bar link worn will be noisy

oil leak engine going over suspension o/s/f

exhaust slightly corroded

some brake pipes slightly corroded

Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)

Offside Front drive shaft coupling is insecure (2.5.C.1c)

exhaust front bracket poor

some brake pipes slightly corroded

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Rear registration plate deteriorated (6.3.1d)

Service brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Front Exhaust system not adequately supported (7.1.1)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Outer Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a)

Nearside Registration plate lamp not working (1.1.5c)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

front tyres close to wear limit. †o/s/f approx 3mm †n/s/f approx 2mm

o/s/f wishbone bushes in poor condition

pads may need changing. should be checked