2001 Peugeot 206

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Rear lamp has water ingress

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded (6.1.1 (c) (i))

Offside Rear Nail in tyre ()

Offside Front Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded (6.1.1 (c) (i))

Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced floor corroded (6.1.1 (c) (i))

Offside Rear Nail in tyre ()

Nearside Rear Outer Tyre slightly damaged/cracking or perishing outer wall cracking (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge wearing thin on the inner edge (5.2.3 (e))

Nearside Rear Outer Tyre slightly damaged/cracking or perishing outer wall cracking (5.2.3 (d) (ii))

Offside Front Inner Tyre worn close to legal limit/worn on edge wearing thin on the inner edge (5.2.3 (e))

Offside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill (6.1.B.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Side repeater missing (1.4.A.2b)

Nearside Front Side repeater not working (1.4.A.2c)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Offside Front Headlamp aim too high (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front Road wheel bead rim badly distorted (4.2.A.1a)

Rear Exhaust has part of the system excessively deteriorated (7.1.1a)

Rear registration plate deteriorated (6.3.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Lower Ball joint has slight play (2.2.B.1f)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front Lower Ball joint has excessive play (2.2.B.1f)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Lower Ball joint has slight play (2.2.B.1f)

Centre Exhaust has a major leak of exhaust gases (7.1.2)

Offside Registration plate lamp not working (1.1.5c)

front brake application uneven (3.7.B.2)