MOT Status
ExpiredMileage
114,241 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit wearing on the inner edge (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
rear wiper blade in poor condition
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front Lower Suspension arm rubber bush bonding deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm badly worn on inner edge (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit wearing on the inner edge (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
rear wiper blade in poor condition
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Brake load sensing valve seized (3.6.E.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear Exhaust has a major leak of exhaust gases silencer joint (7.1.2)
Rear Exhaust system not adequately supported exhaust rubbers broken (7.1.1)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Side repeater slightly discoloured (1.4.A.2f)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Vehicle's internal headlight adjuster altered to recheck lights
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear Brakes imbalanced across an axle (3.7.B.5b)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Vehicle's internal headlight adjuster altered to recheck lights
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Headlamp aim too high (1.8)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Nearside Inner Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar has slight play in a ball joint (2.4.G.2)
Offside Front All position lamps not working (1.1.A.3b)
Offside Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Registration plate lamp not working (1.1.C.1d)
Front Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Headlamp not working on dipped beam (1.7.5a)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT52 BSZ is a 2002 Peugeot 206 in Red with a 1,360cc petrol engine. This vehicle has been through 21 MOT tests with a personal pass rate of 61.9%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BT52 BSZ, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BT52 BSZ?
You can check the full history of BT52 BSZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT52 BSZ registered?
BT52 BSZ is a 2002 Peugeot 206, first registered on 29 November 2002.
Is BT52 BSZ safe to buy?
The MOT history for BT52 BSZ shows 21 tests with a 61.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT52 BSZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT52 BSZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.