MOT Status
ExpiredMileage
102,112 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Nearside Front Steering column shaft has excessive end float rack end (2.1.3)
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill (6.1.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Macpherson strut has excessive movement in the upper support bearing assembly (2.5.B.1b)
Offside Front Steering column shaft has excessive end float rack end (2.1.3)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill and inner sill (6.1.B.2)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
offside outer sill corroded
Brake pipe slightly corroded (3.6.B.2c)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
offside outer sill corroded
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brake pedal spongy (3.3.B.1b)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Rear Parking brake lever has little reserve travel (3.1.6b)
Rear Sub-frame rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both front strut tops have play
rear foot brake effort low
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT52 ZPZ is a 2003 Ford Ka in Black with a 1,299cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 64.7%.
Across all 2003 Ford Ka models, the average MOT pass rate is 66.4% with a typical mileage of 47,451 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BT52 ZPZ, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 23 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT52 ZPZ?
You can check the full history of BT52 ZPZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT52 ZPZ registered?
BT52 ZPZ is a 2003 Ford Ka, first registered on 27 January 2003.
Is BT52 ZPZ safe to buy?
The MOT history for BT52 ZPZ shows 17 tests with a 64.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT52 ZPZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT52 ZPZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.