MOT Status
ExpiredMileage
107,367 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
suspension and suspension mounts corroded
underbody and sills corroded
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Central Exhaust has a major leak of exhaust gases box (6.1.2 (a))
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Emissions unable to be completed (8.2.2.2 (e))
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced at subframe (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at jacking point (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing holed (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill at rear (5.3.6 (a) (i))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at rear (5.3.6 (a) (i))
Power steering pipe/hose excessively corroded (2.1.5 (g) (i))
Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS
Central Prop shaft joint worn, but not excessively (6.1.7 (c) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Fuel Pipe/s corroded ()
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced at diff mount points near side and offside (6.1.1 (c) (i))
Exhaust mounting defective middle (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front chassis legs corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear chassis legs corroded
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Exhaust mounting defective middle (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Front chassis legs corroded
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Rear chassis legs corroded
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front chassis legs corroded
Rear Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))
Rear chassis legs and crossmember corroded
Exhaust system insecure (6.1.2 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Front chassis legs corroded
Rear Stop lamp(s) non-obligatory stop lamp not working high level (4.3.1 (a) (ii))
Rear chassis legs and crossmember corroded
Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))
Fuel Pipe/s corroded ()
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear exhaust parts corroded
Central Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Front Lower Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Fuel Pipe/s corroded ()
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
rear exhaust parts corroded
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
under side of vanbecoming corroded
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Coil spring corroded (5.3.1 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Coil spring corroded (5.3.1 (b) (i))
Offside Rear Coil spring corroded (5.3.1 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
under side of vanbecoming corroded
Nearside Brake pipe excessively corroded front to rear at rear. (1.1.11 (c))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Brake pipe excessively corroded front to rear at rear. (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Stop lamp(s) not working centre. (4.3.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Front Inner Brake pad(s) wearing thin pads. (1.1.13 (a) (ii))
Offside Front Inner Tyre worn close to legal limit/worn on edge edge. (5.2.3 (e))
front tyres scrubbing inner edges.
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Vehicle structure has slight corrosion suspension mount point (6.1.B.2)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Rear Vehicle structure has slight corrosion at suspension mount point (6.1.B.2)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Brake pipe slightly corroded front to rear at rear. (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit tyre perished. (4.1.E.1)
Offside Brake pipe slightly corroded front to rear at rear. (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear rear brake binding (3.7.B.1)
Nearside Brake pipe slightly corroded front to rear at rear. (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit tyre perished. (4.1.E.1)
Offside Brake pipe slightly corroded front to rear at rear. (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Rear tyre tread perished
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Vehicle structure has slight corrosion (6.1.B.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
near side rear tyre side wall perished
Centre Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
near side rear tyre side wall perished
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Direction indicator incorrect colour (1.4.A.2f)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Direction indicator incorrect colour (1.4.A.2f)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear coil spring corroded (2.4.C.1b)
Offside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear coil spring corroded (2.4.C.1b)
Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)
rear brake discs slightly corroded
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT56 GMV is a 2006 Mercedes-benz Vito in White with a 2,148cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 60%.
Across all 2006 Mercedes-benz Vito models, the average MOT pass rate is 69.6% with a typical mileage of 121,092 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying BT56 GMV, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 20 years old, this Mercedes-benz Vito is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT56 GMV?
You can check the full history of BT56 GMV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT56 GMV registered?
BT56 GMV is a 2006 Mercedes-benz Vito, first registered on 27 December 2006.
Is BT56 GMV safe to buy?
The MOT history for BT56 GMV shows 25 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT56 GMV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT56 GMV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.