MOT Status
ExpiredMileage
228,392 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emissions exceed default limit of 1.5m-1 (8.2.2.2 (b))
Nearside Front Service brake excessively binding (1.2.1 (f))
Nearside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Nearside Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear SUBFRAME CORRODED
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
rear brake discs poor condition
wipers slight streaking
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp aim too high (4.1.2 (a))
Nearside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
Offside Rear Service brake fluctuating, but not excessively (1.2.1 (e))
rear brake discs poor condition
wipers slight streaking
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
dpf light flashing
Nearside Registration plate lamp not working (1.1.C.1d)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Registration plate lamp not working (1.1.C.1d)
Registration plate lamp does not illuminate simultaneously with the position lamps (1.1.C.1a)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front brake disc worn
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
dpf light flashing
d.p.f light is showing on dash,
under covers are fitted.
Nearside Front Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp aim too high (1.8)
Offside Headlamp aim not tested (1.8.A.1c)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Mechanical brake component has restricted free movement (3.5.1k)
d.p.f light is showing on dash,
rear brake disc is corroder on offside.
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Headlamp aim too low (1.8)
Offside Headlamp aim too low (1.8)
Parking brake lever has no reserve travel (3.1.6b)
Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Rear rear brake application uneven (3.7.B.2)
Registration plate lamp not working (1.1.C.1d)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Mazda 6?
Based on 1,904,140 MOT tests across 159,651 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BT60 FHM is a 2011 Mazda 6 in Blue with a 2,183cc diesel engine. This vehicle has been through 16 MOT tests with a personal pass rate of 68.8%.
Across all 2011 Mazda 6 models, the average MOT pass rate is 76.6% with a typical mileage of 83,695 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 6 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 45,082 recorded failures. If you're considering buying BT60 FHM, it's worth having these areas checked by a mechanic before committing.
The Mazda 6 typically stays on UK roads for around 24 years. At 15 years old, this Mazda 6 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BT60 FHM?
You can check the full history of BT60 FHM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BT60 FHM registered?
BT60 FHM is a 2011 Mazda 6, first registered on 12 January 2011.
Is BT60 FHM safe to buy?
The MOT history for BT60 FHM shows 16 tests with a 68.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BT60 FHM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BT60 FHM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.