MOT Status
ExpiredMileage
149,592 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all by load valve (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened corroded on inner surfaces (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge, cut on inner sidewall (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
minor blow on exhaust
Nearside Brake cable damaged handbrake cable snapped (1.1.15 (a))
Nearside Parking brake inoperative on one side (1.4.1 (a))
Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS
Offside Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake pipe corroded, covered in grease or other material all by load valve (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened corroded on inner surfaces (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge, cut on inner sidewall (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Rear Brake disc worn, pitted or scored, but not seriously weakened corroded (1.1.14 (a) (ii))
minor blow on exhaust
Brake load sensing valve stiff (1.1.17 (c) (ii))
Offside Rear tyre perishing between tread blocks
front and rear brake discs corroding
Brake load sensing valve stiff (1.1.17 (c) (ii))
Nearside Position lamp not working (4.2.1 (a) (ii))
Offside Rear tyre perishing between tread blocks
front and rear brake discs corroding
Brake load sensing valve stiff (1.1.17 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear tyre perishing between tread blocks
Brake load sensing valve stiff (1.1.17 (c) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Rear tyre perishing between tread blocks
Brake load sensing valve stiff (1.1.17 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Nearside screenwash not working but o/s jet adequate to clean screen
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear tyre perishing between tread blocks.
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (i))
Nearside Front Brake pipe corroded, covered in grease or other material to rear (1.1.11 (c))
Nearside screenwash not working but o/s jet adequate to clean screen
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear tyre perishing between tread blocks.
Brake pipe corroded, covered in grease or other material 2x to load valve (1.1.11 (c))
Offside Rear brake slight bind
brake load valve stiff
minor exhaust blow at front section to manifold area
wipers deteriorating
Brake load sensing valve stiff (1.1.17 (c) (i))
Exhaust has a minor leak of exhaust gases at front section flange to manifold area (6.1.2 (a))
Offside Rear Brake pipe corroded, covered in grease or other material to load valve (1.1.11 (c))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level stop light (4.3.1 (a) (i))
Nearside Rear Brake disc significantly and obviously worn due to metal on metal contact with pads (1.1.14 (a) (i))
Nearside Rear Position lamp adversely affected by the operation of another lamp lights have a fault/dull/not working with indicator on (4.2.3 (c))
Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp dull/not working with other lights on (4.3.3 (b))
Nearside Rear Brake pad(s) less than 1.5 mm thick down to metal (1.1.13 (a) (ii)) DANGEROUS
Brake load sensing valve stiff (1.1.17 (c) (i))
Exhaust has a minor leak of exhaust gases at front section flange to manifold area (6.1.2 (a))
Offside Rear Brake pipe corroded, covered in grease or other material to load valve (1.1.11 (c))
Stop lamp(s) with a multiple light source up to 1/2 not functioning high level stop light (4.3.1 (a) (i))
Rear Exhaust has a minor leak
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Front Brake disc significantly and obviously worn corroded (1.1.14 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Tyre worn close to legal limit/worn on edge shallow cuts (5.2.3 (e))
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake pad(s) wearing thin (3.5.1g)
Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit wearing on inner and outer edges of tyres (4.1.E.1)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front Tyre worn close to the legal limit worn on inner edge (4.1.E.1)
Offside Front Tyre worn close to the legal limit wearing on inner and outer edges of tyres (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight blow on cat pipe
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Offside Stop lamp not working (1.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
slight blow on cat pipe
Exhaust has a minor leak of exhaust gases (7.1.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (3.6.A.1)
Nearside Rear brake disc contaminated by brake fluid (3.5.1h)
Nearside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Front Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Brake pad(s) wearing thin (3.5.1g)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
temp repair made to exhaust
Brake load sensing valve linkage seized (3.6.E.3)
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Headlamp aim too low (1.8)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front position lamp(s) incorrect colour (1.1.A.3e)
Offside Headlamp aim too high (1.8)
Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BU02 YMD is a 2002 Peugeot 206 in Red with a 1,587cc petrol engine. This vehicle has been through 32 MOT tests with a personal pass rate of 62.5%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BU02 YMD, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BU02 YMD?
You can check the full history of BU02 YMD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BU02 YMD registered?
BU02 YMD is a 2002 Peugeot 206, first registered on 1 March 2002.
Is BU02 YMD safe to buy?
The MOT history for BU02 YMD shows 32 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BU02 YMD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BU02 YMD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.