MOT Status
ExpiredMileage
144,979 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Emissions not tested (8.2.1.2 (d))
Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Rear Exhaust system insecure (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced inner sill (6.1.1 (c) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Anti-roll bar linkage has excessive play in a pin/bush both (2.4.G.2)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Body has a projection caused by damage door mirror case has sharp edges (6.1.C.1)
Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Seat belt anchorage prescribed area is excessively corroded chassis leg/floor pan (5.2.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
Nearside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner arch (2.4.A.3)
Stop lamp has light sources not illuminating, but not more than 50% high level lamp has bulb/s out (1.2.1b)
all brake pipes heavily greased affecting proper assessment
general corrosion on rear chassis legs
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
light marks on windscreen
Battery insecure (1.9.1)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
light marks on windscreen
Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Rear Exhaust has part of the system excessively deteriorated (7.1.1a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BU02 YTH is a 2002 Peugeot 206 in Silver with a 1,360cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2002 Peugeot 206 models, the average MOT pass rate is 67.0% with a typical mileage of 65,592 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BU02 YTH, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 24 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BU02 YTH?
You can check the full history of BU02 YTH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BU02 YTH registered?
BU02 YTH is a 2002 Peugeot 206, first registered on 1 March 2002.
Is BU02 YTH safe to buy?
The MOT history for BU02 YTH shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BU02 YTH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BU02 YTH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.