2002 Ford Puma

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Coil spring corroded All 4 Front To Rear (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread Front And Rear (0.1 (b))

Repairs Completed And Covered In Sealant

Shock absorbers light misting of oil or has limited damping effect All 4 Front & Rear (5.3.2 (b))

Under Body Corroded Front To Rear

Brake performance not tested (1.2.1 (g))

Brake pipe excessively corroded Complete Front To Rear (1.1.11 (c))

Front Road wheel fixing missing Nearside And Offside (5.2.1 (a) (i))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Complete Front To Rear Outer Sill (6.2.2 (d) (i))

Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Complete Front To Rear Outer Sill (6.2.2 (d) (i))

Coil spring corroded All 4 Front To Rear (5.3.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread Front And Rear (0.1 (b))

Shock absorbers light misting of oil or has limited damping effect All 4 Front & Rear (5.3.2 (b))

Under Body Corroded Front To Rear

Exhaust emits blue smoke during acceleration (7.3.A.2c)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Vehicle structure has slight corrosion (6.1.B.2)

n/s & o/s inner sills corroded.

offside front outer sill has traces of bodyfiller.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

Trailing arm has slight play in a pin/bush n/s and o/s rear (2.4.G.2)

exhaust system slightly corroded

oil leak

service and parking brake efficiency only just met requirements

vehicle chassis structure and sills slightly corroded

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Upper Trailing arm has excessive play in a pin/bush (2.4.G.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings door / sill area chalked, in seat belt mounting area (6.1.B.2)

Offside Rear Upper Trailing arm has excessive play in a pin/bush (2.4.G.2)

Front registration plate delaminated but not likely to be misread (6.3.1d)

Rear registration plate delaminated but not likely to be misread (6.3.1d)

both sills corroded, no holes

front brake discs pitted

n/s/r handbrake performance low

oil leak

Nearside Front Suspension arm ball joint dust cover missing (2.4.G.2)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover missing (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Radius arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

center brake light

indicator stork

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Headlamp not working on dipped beam (1.7.5a)

Tyre tread depth below requirements of 1.6mm (4.1.E.1)