MOT Status
ExpiredMileage
95,336 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake hose has slight corrosion to ferrule all ferrules (1.1.12 (f) (i))
Nearside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
inner sills corroded
suspension components corroded
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Suspension component corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively Both (3.4 (b) (ii))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Brake hose has slight corrosion to ferrule All (1.1.12 (f) (i))
Suspension component corroded but not seriously weakened Front and rear (5.3.3 (b) (i))
Brake hose has slight corrosion to ferrule all hoses (1.1.12 (f) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
corrosion on nearside sill
suspension components corroded
Brake hose has slight corrosion to ferrule all ferrules (1.1.12 (f) (i))
Nearside inner sill corroded
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner and outer (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
suspension components corroded
Exhaust emissions exceed manufacturer's specified limit (8.2.2.2 (a))
Brake hose has slight corrosion to ferrule all ferrules (1.1.12 (f) (i))
Nearside inner sill corroded
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement inner and outer (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
suspension components corroded
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Offside Rear Brake pad(s) less than 1.5 mm thick outer pad (1.1.13 (a) (ii)) DANGEROUS
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Brake load sensing valve stiff (1.1.17 (c) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened bot sides (1.1.14 (a) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Exhaust system insecure (6.1.2 (a))
Nearside Outline marker lamp not working (4.2.1 (a) (ii))
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Side repeater incorrect colour both sides (4.4.3 (a))
Brake load sensing valve stiff (1.1.17 (c) (i))
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Front Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Brake disc worn, pitted or scored, but not seriously weakened bot sides (1.1.14 (a) (ii))
Rear Brake hose has slight corrosion to ferrule both sides (1.1.12 (f) (i))
Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Offside Outline marker lamp missing (4.2.1 (a))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen wiper does not clear the windscreen effectively both (3.4 (b) (ii))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement all (5.3.4 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Brake load sensing valve linkage seized (3.6.E.3)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Centre two exhaust mountings perished
Offside handbrake leaver or cable sticking
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Centre two exhaust mountings perished
Offside handbrake leaver or cable sticking
Nearside Front Side repeater slightly discoloured (1.4.A.2f)
Offside Front Side repeater slightly discoloured (1.4.A.2f)
Centre Rear Exhaust system not adequately supported (7.1.1)
Offside Front Exhaust has a major leak of exhaust gases (7.1.2)
Offside Fuel tank insecure (7.2.1)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
washer bottle leaking
Horn not working (1.6.2a)
washer bottle leaking
How Reliable is the Iveco Daily 35 S12 LWB?
Based on 6,573 MOT tests across 589 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BU06 MDZ is a 2006 Iveco Daily 35 S12 LWB in White with a 2,300cc diesel engine. This vehicle has been through 25 MOT tests with a personal pass rate of 64%.
Across all 2006 Iveco Daily 35 S12 LWB models, the average MOT pass rate is 64.4% with a typical mileage of 118,294 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Iveco Daily 35 S12 LWB fails its MOT is parking brake: efficiency below requirements, accounting for 681 recorded failures. If you're considering buying BU06 MDZ, it's worth having these areas checked by a mechanic before committing.
The Iveco Daily 35 S12 LWB typically stays on UK roads for around 21 years. At 20 years old, this Iveco Daily 35 S12 LWB is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BU06 MDZ?
You can check the full history of BU06 MDZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BU06 MDZ registered?
BU06 MDZ is a 2006 Iveco Daily 35 S12 LWB, first registered on 21 August 2006.
Is BU06 MDZ safe to buy?
The MOT history for BU06 MDZ shows 25 tests with a 64% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BU06 MDZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BU06 MDZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.