2007 Hyosung GT125

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Rear Rear reflector missing (4.8.2 (a) (ii))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Drive chain worn to excess (6.1.7 (c) (i))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Front Brake lever soft with long travel

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Clutch lever bent (6.2.7 (b))

Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Rear Brake pedal is positioned so that the brake cannot be readily applied TOO HIGH (1.1.2 (d))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Clutch lever bent (6.2.7 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Offside Front Motorcycle structure is fractured but structural rigidity is not significantly reduced side fairing (6.1.1 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

front brake lever end broken off

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Suspension arm ball joint excessively worn rear swinging arm play (5.3.4 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

front brake lever end broken off

Drive chain excessively tight (6.1.7 (k) (i))

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Front Brake excessively binding (1.2.1 (f))

Headlamp aim too high (4.1.2 (a))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Fuel system component leaking around in line filter (7.2.1a)

Nearside Front Direction indicators not working (1.5.1c)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Non obligatory mirror damaged both mirrors loose ()

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Registration plate insecure (6.3.1b)

Rear Roller brake test indicates a binding brake (3.3.A1a)

Rear Drive chain sprocket slightly worn (6.2.1e)

slight cuts in front tyre tread

front tyre tread split, not to cords or dangerous

nearside mirror glass cracked

rear brake fluid on lower level on resevoir