2008 Iveco Daily 35C12 LWB

Body mounting fixings insecure body bolts slack (6.2.2 (c) (i))

Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing (5.3.6 (a) (i))

Offside Outline marker lamp likely to become detached (4.2.1 (c) (ii))

Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Position lamp not working both (4.2.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Bonnet seriously at risk of opening inadvertently safty siezed (3.1 (b) (ii)) DANGEROUS

Exhaust silencer slightly loose (8.1.1 (b) (i))

Nearside Front Lower ball joint has slight play

both front top marker lamps inop

eml illuminated

n/s/r side marker lamp insecure

oil leak

rear diff leaking

Battery insecure (1.9.1)

Exhaust system not adequately supported 2 x front exhaust mountings split (7.1.1)

Exhaust system not adequately supported tailpipe insecure (7.1.1)

Front Sub-frame corroded and seriously weakened (2.4.G.1)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Hazard warning switch faulty (1.4.B.1d)

Nearside Rear Anti-roll bar linkage damaged and seriously weakened (2.4.G.1)

Nearside Side repeater excessively damaged so that it is not visible from a reasonable distance (1.4.A.2e)

Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded chassis (3.6.C.3)

Offside Front Seat belt anchorage prescribed area is excessively corroded outrigger holed at body mts and seatbelt mts (5.2.6)

Offside front brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside mirror housing damaged

2 x front body bolts insecure

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear side marker insecure

Oil leak ()

Rear Brake pad(s) wearing thin (3.5.1g)

both front top marker lamps inop

engine management light illuminated

reverse lights coming on intermittently

Nearside Front Headlamp aim too low (1.8)

Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear Parking brake is not capable of being maintained in operation by direct mechanical action only (3.1.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front suspension has slight play in a lower suspension ball joint both sides (2.5.B.1a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Headlamp not working on main beam (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Lower All position lamps not working (1.1.A.3b)

Offside Upper All position lamps not working (1.1.A.3b)

Registration plate lamp not working (1.1.C.1d)

Rear Registration plate lamp not working (1.1.C.1d)