2003 Peugeot Boxer

Exhaust has a minor leak of exhaust gases At rear hanger mounting. (6.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Power steering pipe/hose slightly corroded At rack. (2.1.5 (g) (i))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Sub-frame corroded and seriously weakened Excessively corroded at lower arm front mounting. (5.3.3 (b) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Beside front crossmember mounting points. (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases At rear hanger mounting. (6.1.2 (a))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Power steering pipe/hose slightly corroded At rack. (2.1.5 (g) (i))

Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Central Exhaust has a major leak of exhaust gases centre box has hole in (6.1.2 (a))

Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Oil leak, but not excessive (8.4.1 (a) (i))

Power steering pipe/hose slightly corroded (2.1.5 (g) (i))

Offside Front Brake pipe corroded, covered in grease or other material above sub frame (1.1.11 (c))

Offside Front Power steering pipe/hose slightly corroded on rack (2.1.5 (g) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively changed blade (3.4 (b) (ii))

Offside Front Brake pipe corroded, covered in grease or other material above sub frame (1.1.11 (c))

Offside Front Power steering pipe/hose slightly corroded on rack (2.1.5 (g) (i))

Offside Rear Stop lamp(s) not working changed bulb (4.3.1 (a) (ii))

Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Offside Rear Tyre has a tear, caused by separation or partial failure of its structure outside wall (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Parking brake: efficiency below requirements (3.7.C.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front Front wheel bearing rough when rotated (2.5.A.2)

Nearside Rear Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front wiper blade split

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

front brake discs corroded on inner face

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

front brake discs corroded on inner face

n/s/r tyre perishing

Nearside Front front brake binding (3.7.B.1)

Offside Rear rear brake binding (3.7.B.1)

rear brake binding o/s/r

front number plate poor

Offside Registration plate lamp not working (1.1.C.1d)