2007 Ldv Maxus

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Service brake efficiency below requirements (1.2.2 (a) (i))

Registration plate deteriorated but not likely to be misread front and rear (0.1 (b))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Registration plate deteriorated but not likely to be misread both front and rear (0.1 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Brake pipe excessively corroded cross rear axle (1.1.11 (c))

Offside Brake pipe excessively corroded front to rear (1.1.11 (c))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Rear fog lamp tell-tale not working (4.9.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Passenger seat(s) missing at time of test ()

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Outer Suspension component mounting prescribed area damaged but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Registration plate deteriorated but not likely to be misread both front and rear (0.1 (b))

Front Brake pad(s) less than 1.5 mm thick both sides (3.5.1g)

Nearside Brake pipe excessively corroded front to rear (3.6.B.2c)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Rear Brake pipe excessively corroded across axle (3.6.B.2c)

Nearside rear brake binding (3.7.B.1)

Offside rear brake binding (3.7.B.1)

Parking brake: efficiency below requirements (3.7.B.7)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Service brake: efficiency below requirements (3.7.B.7)

rear brake recording little or no effort both sides (3.7.B.5a)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

Front brake disc worn, pitted or scored, but not seriously weakened both sides (3.5.1i)

Nearside Outer Suspension spring mounting prescribed area is corroded but not considered excessive sill and damaged (2.4.A.3)

Offside Outer Suspension spring mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Brake pipe slightly corroded rear section of both front to rear (3.6.B.2c)

Front Outer Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt both sides (2.4.G.4e)

Nearside Rear Brake pipe slightly corroded cross rear axle (3.6.B.2c)

Nearside Rear Outer Suspension spring mounting prescribed area is distorted but not considered excessive sill damaged (2.4.A.3)

Passenger seat(s) missing at time of test all ()

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear wheel bearing has slight play both sides (2.6.2)

both rear tyres starting to deteriorate

both rear tyres starting to deteriorate

Brake pipe excessively corroded 2 pipes to load valve mark (3.6.B.2c)

Parking brake lever has no reserve travel (3.1.6b)

Parking brake: efficiency below requirements (3.7.B.7)

Brake pipe slightly corroded rear section of both front to rear (3.6.B.2c)

Front Outer Drive shaft which forms part of the suspension coupling gaiter deteriorated, but preventing the ingress of dirt both sides (2.4.G.4e)

Nearside Rear Brake pipe slightly corroded cross rear axle (3.6.B.2c)

Nearside Rear Outer Suspension spring mounting prescribed area is distorted but not considered excessive sill damaged (2.4.A.3)

Passenger seat(s) missing at time of test all ()

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Rear wheel bearing has slight play both sides (2.6.2)

both rear tyres starting to deteriorate

both rear tyres starting to deteriorate

Nearside Front Anti-roll bar has slight play in a pin/bush inner (2.4.G.2)

Nearside Front Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Anti-roll bar has slight play in a pin/bush inner (2.4.G.2)

Offside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Tyre has ply or cords exposed (4.1.D.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Front constant velocity joint is insecure (2.5.C.1b)

Nearside Headlamp aim too high (1.8)

Offside Headlamp aim too high (1.8)

Brake load sensing valve linkage seized (3.6.E.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Offside Front Side repeater not working (1.4.A.2c)

Offside Headlamp aim too high (1.8)

Offside Stop lamp not working (1.2.1b)

Nearside Front Side repeater not working (1.4.A.2c)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Rear Shock absorber insecure (2.7.2b)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Stop lamp not working (1.2.1b)