2002 Ford Escort

Headlamp switch faulty (1.7.1)

Nearside Headlamp aim too low (1.8)

Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount (2.4.A.3)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Anti-roll bar linkage ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount (2.4.A.3)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Track rod end ball joint has slight play (2.2.B.1f)

Offside Front worn on inner edge

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear tyres different size to front

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake lever has no reserve travel (3.1.6b)

Rear Exhaust has a major leak of exhaust gases (7.1.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

rear tyres different size to front

unable to do emmisions test due to exhaust not available

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Offside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

nearside front tyre worn on inner edge

Horn not working (1.6.2a)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

noise at cambelt area

windscreen washer bottle leaking

Brake load sensing valve linkage seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside front brake application uneven (3.7.B.2)

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

noise at cambelt area

windscreen washer bottle leaking

Exhaust has part of the system slightly deteriorated (7.1.1a)

Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Power steering component(s) has slight seepage from a component (2.3.3b)

Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)

Brake hose slightly deteriorated (3.6.B.4d)

Nearside Registration plate lamp not working (1.1.5c)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

off side rear top shockabsorber mounting cross member rusted

sills floor and chassis rails rusted

Brake hose slightly deteriorated (3.6.B.4d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

off side rear top shockabsorber mounting cross member rusted

sills floor and chassis rails rusted

windscreen washer bottle mounting brocken?

Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Offside Rear Brake load sensing valve linkage seized (3.6.E.3)