MOT Status
ValidMileage
143,762 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid (1.1.16 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS
Brake hydraulic reservoir fluid level below minimum level (1.1.10 (d) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Play in steering rack inner joint(s) ()
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill x2 (5.3.6 (a) (i))
Nearside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Service brake efficiency below requirements (1.2.2 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Brakes imbalanced across an axle 55% (1.2.1 (b) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Brake load sensing valve linkage seized (3.6.E.3)
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill (2.4.A.3)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded shock mounting (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Brake load sensing valve seized (3.6.E.3)
Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake load sensing valve linkage stiff (3.6.E.3)
Front No plate delaminating
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
both nearside and offside rear top shock mounts area slightly corroded but not excessive
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
n/s door mirror slightly loose
Nearside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Front brake disc slightly pitted (3.5.1h)
How Reliable is the Ford Escort?
Based on 4,961,191 MOT tests across 821,553 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV02 DXG is a 2002 Ford Escort in White with a 1,753cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 70.4%.
Across all 2002 Ford Escort models, the average MOT pass rate is 67.7% with a typical mileage of 88,294 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Ford Escort fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 465,333 recorded failures. If you're considering buying BV02 DXG, it's worth having these areas checked by a mechanic before committing.
The Ford Escort typically stays on UK roads for around 38 years. At 24 years old, this Ford Escort is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BV02 DXG?
You can check the full history of BV02 DXG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV02 DXG registered?
BV02 DXG is a 2002 Ford Escort, first registered on 15 March 2002.
Is BV02 DXG safe to buy?
The MOT history for BV02 DXG shows 27 tests with a 70.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV02 DXG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV02 DXG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.