MOT Status
ExpiredMileage
112,642 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened N/S & O/S (1.1.14 (a) (ii))
Front Suspension arm pin or bush worn but not resulting in excessive movement N/S & O/S (5.3.4 (a) (i))
Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension arm pin or bush worn but not resulting in excessive movement N/S & O/S (5.3.4 (a) (i))
Offside Suspension arm ball joint has slight play (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Rear Exhaust noisy (8.1.1 (a))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front coil spring broken (2.4.C.1a)
Offside Rear Stop lamp not working (1.2.1b)
Offside Rear position lamp(s) not working (1.1.A.3b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Nearside Rear Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Anti-roll bar linkage ball joint dust cover missing (2.4.G.2)
Offside Rear Registration plate lamp not working (1.1.C.1d)
Offside Rear Trailing arm has excessive play in a pin/bearing (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Rear Brake pipe slightly corroded by valve (3.6.B.2c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Direction indicator affected by the operation of another lamp (1.4.A.2h)
Rear Brake pipe slightly corroded by valve (3.6.B.2c)
Rear exhaust clamp cracked
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Rear Brake pipe slightly corroded (3.6.B.2c)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
brake pedal spongy
n/s and o/s front tyres worn to 2mm and 1.6mm on inside treads
o/s/f wheel bearing slightly noisy[not excesivly rough]
o/s/r tyre sidewall worn and cracked
Nearside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Nail in offside rear tyre
N/S/F BRAKE DISC CORRIOED
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brake valve leaking (3.6.A.1)
Nearside Rear Rear position lamp(s) not working (1.1.A.3b)
N/S/F BRAKE DISC CORRIOED
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Brake hose twisted (found during steering lock to lock check) (2.2.D.2b)
Nearside Front Road wheel badly damaged (4.2.A.1a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
both rear tyres have two nails in them
Nail in nearside rear tyre
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Emissions not tested (7.0)
Nail in nearside rear tyre
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake load sensing valve linkage seized (3.6.E.3)
Nearside Front Brake pad(s) wearing thin (3.5.1g)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV03 AYN is a 2003 Peugeot 206 in Red with a 1,398cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 65.4%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BV03 AYN, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BV03 AYN?
You can check the full history of BV03 AYN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV03 AYN registered?
BV03 AYN is a 2003 Peugeot 206, first registered on 23 April 2003.
Is BV03 AYN safe to buy?
The MOT history for BV03 AYN shows 26 tests with a 65.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV03 AYN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV03 AYN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.