2003 MG ZS

Offside Front Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

timing belt expossed

ECU light on

Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Oil leak ()

Engine management light illuminated

Front Suspension component mounting prescribed area is corroded but not considered excessive near and offside, anti roll bar mounting area (2.4.A.3)

Handbrake efficiency only just met, system may need maintenance or adjustment

Manufacturers sill covers fitted restricting inspection of components

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive near and offside, forward suspension arm mounting area (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Battery insecure (1.9.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Anti-lock braking system component excessively damaged abs ring broken (3.4.2)

Offside Front coil spring broken (2.4.C.1a)

Offside Headlamp not working on main beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Parking brake: efficiency below requirements (3.7.B.7)

Steering wheel retaining device insecure (2.1.6)

Engine management light illuminated

Front Suspension component mounting prescribed area is corroded but not considered excessive near and offside, anti roll bar mounting area (2.4.A.3)

Manufacturers sill covers fitted restricting inspection of components

Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Rear Suspension component mounting prescribed area is corroded but not considered excessive near and offside, front suspension arm mounting area (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Outer casing of rear exhaust silencer corroded

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Parking brake: efficiency below requirements (3.7.B.7)

Brake hose has slight corrosion to ferrules (3.6.B.4e)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Outer casing of rear exhaust silencer corroded

Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside front tyre very low on inner edge.

Nearside rear tyre out of shape on inner edge.

Rear registration plate faded but not likely to be misread (6.3.1d)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside rear brake grabbing slightly (3.7.A.5b)

rear brake discs in poor condition.signs of corrosion to both sides front floorpans.

Nearside Headlamp aim too high (1.8)

Nearside Headlamp aim too high (1.8)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Headlamp aim too high (1.8)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

Nearside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

gear linkage coroded/stiff

nearside front tyre wear

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Nearside rear parking brake recording little or no effort (3.7.B.6a)

Offside rear parking brake recording little or no effort (3.7.B.6a)

Parking brake: efficiency below requirements (3.7.B.7)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

hand brakes only just legal requirement of 16%

Nearside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS

hand brakes only just legal requirement of 16%