MOT Status
ExpiredMileage
114,079 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake load sensing valve seized (3.6.E.3)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front suspension has slight play in a lower suspension ball joint (2.5.B.1a)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Brake load sensing valve linkage stiff (3.6.E.3)
Centre Front Exhaust has a minor leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
fuel staining around filler pipe
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Outer Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Lower Ball joint has slight play (2.2.B.1f)
Offside Rear Radius arm has slight play in a pin bearing (2.4.G.2)
front pads appear to be wearing?
Nearside Front Side repeater incorrect colour (1.4.A.2f)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Side repeater incorrect colour (1.4.A.2f)
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Offside Rear Stop lamp not working (1.2.1b)
Rear Rear fog lamp not working (1.3.2b)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear wheel bearing rough when rotated (2.6.1)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
n/s/r wheel bearing slightly noisey
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Track rod end ball joint has excessive play (2.2.B.1f)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Stop lamp not working (1.2.1b)
Parking brake lever has no reserve travel (3.1.6b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 206?
Based on 9,831,622 MOT tests across 644,158 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV03 GHF is a 2003 Peugeot 206 in Silver with a 1,124cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 66.7%.
Across all 2003 Peugeot 206 models, the average MOT pass rate is 68.8% with a typical mileage of 62,409 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 206 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 446,851 recorded failures. If you're considering buying BV03 GHF, it's worth having these areas checked by a mechanic before committing.
The Peugeot 206 typically stays on UK roads for around 28 years. At 23 years old, this Peugeot 206 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BV03 GHF?
You can check the full history of BV03 GHF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV03 GHF registered?
BV03 GHF is a 2003 Peugeot 206, first registered on 21 March 2003.
Is BV03 GHF safe to buy?
The MOT history for BV03 GHF shows 18 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV03 GHF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV03 GHF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.