2003 Subaru Forester

Brake fluid warning lamp illuminated (3.6.G.2)

Central Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Inner Subframe mounting prescribed area is excessively corroded seal (2.4.A.3)

Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded arch (2.4.A.3)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded outer arch (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Stop lamp not working (1.2.1b)

Offside Stop lamp not working (1.2.1b)

Rear Brake pipe excessively corroded both (3.6.B.2c)

Nearside Front wheel bearing has excessive play (2.5.A.3c) DANGEROUS

Nearside Front wheel bearing rough when rotated (2.5.A.2) DANGEROUS

Front suspension has slight movement at a wishbone pin or bush both (2.5.A.1c)

Offside Rear Inner Suspension spring mounting prescribed area is corroded but not considered excessive arch (2.4.A.3)

Oil leak from oil engine ()

Rear Sub-frame slightly distorted (2.4.G.1)

engine light on

Exhaust has a minor leak of exhaust gases joint between front and centre (7.1.2)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

rear prop front U/J u/s

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded seal (5.2.6)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Inner Seat belt anchorage prescribed area is excessively corroded seal (5.2.6)

Exhaust has a minor leak of exhaust gases joint between front and centre (7.1.2)

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

rear prop front U/J u/s

Front Anti-roll bar linkage has slight play in a pin/bush both (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Battery insecure (1.9.1)

Front Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Stop lamp not working (1.2.1b)

Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Rear Brake pipe slightly corroded (3.6.B.2c)

Battery insecure (1.9.1)

Nearside Stop lamp not working (1.2.1b)

Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside front driveshaft inner boot solit.

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Brake pad(s) wearing thin (3.5.1g)