2003 Ford Focus

Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer's specified limits (8.2.1.2 (a))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and sill connecting point to inner wheel arch badly corroded (6.2.2 (d) (i))

Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords cut in outer sidewall showing cords (5.2.3 (d) (i))

Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outer sill and sill connecting point to inner wheel arch badly corroded (6.2.2 (d) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing worn smooth on edges and cracking slightly (5.2.3 (d) (ii))

Nearside Front n/s front wheel is slightly tight to rotate by hand, possible slight brake bind

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement n/s rear trailing arm bush worn and not correctly seated in trailing arm (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing cracking slightly (5.2.3 (d) (ii))

Nearside Front Track rod end ball joint has excessive play dangerous (2.1.3 (b) (i))

Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside front steering tie arm has play

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

oil leak

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Exhaust emits excessive dense blue smoke during acceleration (7.3.A.2c)

Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside front steering tie arm has play

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

oil leak

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Tyre worn close to the legal limit (4.1.E.1)

Headlamp not working on dipped beam (1.7.5a)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)