MOT Status
ExpiredMileage
84,886 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear brakes slight imbalance 16%
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Exhaust system insecure (6.1.2 (a))
Fuel hose insecure fuel filter (6.1.3 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Headlamp aim too low (4.1.2 (a))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill back (7.1.1 (a) (i))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Rear brakes slight imbalance 16%
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Headlamp aim too low (4.1.2 (a))
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust mounting defective (6.1.2 (a))
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Offside Front Road wheel slightly distorted (5.2.2 (c) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive floor (7.1.1 (a) (i))
Offside Seat belt anchorage prescribed area is corroded but not considered excessive sill (7.1.1 (a) (i))
Rear Suspension arm pin or bush excessively worn Both side. (5.3.4 (a) (i))
Nearside Rear Macpherson strut pin or bush excessively worn top mount bush (5.3.4 (a) (i))
Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Rear Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm bush (5.3.4 (a) (i))
Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Front Inner Tyre worn close to the legal limit both (4.1.E.1)
Front position lamp(s) has a product on the lens but not adversely affecting light output (1.1.A.3d)
Nearside Rear coil spring corroded (2.4.C.1b)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Tyre tread depth below requirements of 1.6mm nail (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Tyre has ply or cords exposed (4.1.D.1b) DANGEROUS
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
both rear tyres 2.5mm
Nearside Headlamp aim too high (1.8)
Offside Rear coil spring broken (2.4.C.1a)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Brake hydraulic reservoir fluid level below minimum level (3.6.G.1b)
Headlamp not working on dipped beam (1.7.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Front registration plate character(s) not correctly formed (6.3.4b)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Horn emits two or more alternating tones (1.6.2d)
Nearside Front Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV06 DBO is a 2006 Ford Ka in Blue with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying BV06 DBO, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BV06 DBO?
You can check the full history of BV06 DBO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV06 DBO registered?
BV06 DBO is a 2006 Ford Ka, first registered on 30 March 2006.
Is BV06 DBO safe to buy?
The MOT history for BV06 DBO shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV06 DBO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV06 DBO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.