MOT Status
ExpiredMileage
152,891 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides also corroded (5.3.4 (a) (i))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Rear Oil leak, but not excessive diff (8.4.1 (a) (i))
sills corroded inner
underbody corroded
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement sills corroded inner (5.3.4 (a) (i))
diff leaking
rear outer wings corroded
underbody corroded
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))
Front Suspension arm ball joint has slight play both sides (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))
Suspension arm pin or bush worn but not resulting in excessive movement sills corroded inner (5.3.4 (a) (i))
diff leaking
rear outer wings corroded
underbody corroded
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii))
Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Front Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Front Shock absorbers has a slightly worn bush (5.3.2 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement both sides (5.3.4 (a) (i))
Front Tyre slightly damaged/cracking or perishing also wearing on edges (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Anti-roll bar corroded but not seriously weakened (5.3.3 (b) (i))
Rear Brake disc worn, but not excessively (1.1.14 (a) (i))
Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Rear outer arches
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
diff leaking slightly
sills corroded
underbody corroded
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
TPM Light On During Test
Tyre worn close to legal limit/worn on edge Both Front Worn Outer edge (5.2.3 (e))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))
Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
TPM Light On During Test
Tyre worn close to legal limit/worn on edge Both Front Worn Outer edge (5.2.3 (e))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Engine oil leaks.
Front metal brake pipes corroded.
O/S Park brake low effort.
TPS Warning light on.
Windscreen damaged.
Front Lower Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate does not conform to the specified requirements front and rear. (0.1 (d))
Front Lower Oil leak, but not excessive (8.4.1 (a) (i))
Offside Front Outer Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin on limit. (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Offside Rear Upper Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Engine covers fitted obscuring some components in the engine bay
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Under-trays fitted obscuring some underside components
rear differential oil leak
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear wheel bearing has slight play (2.6.2)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Track rod end ball joint has excessive play (2.2.B.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Chrysler-jeep 300?
Based on 115,793 MOT tests across 6,930 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV07 LXH is a 2007 Chrysler-jeep 300 in Green with a 2,987cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 76.2%.
Across all 2007 Chrysler-jeep 300 models, the average MOT pass rate is 70.9% with a typical mileage of 77,001 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Chrysler-jeep 300 fails its MOT is parking brake: efficiency below requirements, accounting for 8,438 recorded failures. If you're considering buying BV07 LXH, it's worth having these areas checked by a mechanic before committing.
The Chrysler-jeep 300 typically stays on UK roads for around 21 years. At 19 years old, this Chrysler-jeep 300 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of BV07 LXH?
You can check the full history of BV07 LXH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV07 LXH registered?
BV07 LXH is a 2007 Chrysler-jeep 300, first registered on 1 March 2007.
Is BV07 LXH safe to buy?
The MOT history for BV07 LXH shows 21 tests with a 76.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV07 LXH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV07 LXH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.