2008 Jaguar X-type

Items removed from driver's view prior to test ()

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

exhaust heat shield insecure

reversing lamps inop

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor and sill (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Items removed from driver's view prior to test ()

Nearside Rear Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

exhaust heat shield insecure

low fuel warning on

reversing lamps inop

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement rear (2.4.G.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Front Exhaust has a minor leak of exhaust gases flexy pipe (7.1.2)

Nearside Front Anti-roll bar linkage has slight play in a ball joint drop link (2.4.G.2)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt inner and outer (2.5.C.1a)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high (1.8)

Offside Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Rear brake disc in such a condition that it is seriously weakened (3.5.1i)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)