MOT Status
ValidMileage
101,749 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))
Exhaust mounting defective (6.1.2 (a))
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Central Exhaust system insecure (6.1.2 (a))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Offside Front Coil spring fractured or broken (5.3.1 (b) (i))
Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))
Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Brake pedal has insufficient reserve travel (1.1.2 (a))
Central Front Exhaust system insecure (6.1.2 (a))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Brake pipe corroded, covered in grease or other material both front to rear (1.1.11 (c))
Front Brake disc worn, pitted or scored, but not seriously weakened both (1.1.14 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Central Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Central Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Central Exhaust mounting defective (6.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Wiper blade slightly smearing
Offside Wiper blade slightly smearing
Spare tyre defective Flat ()
Offside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Brake pipe corroded, covered in grease or other material Front to Rear (1.1.11 (c))
Nearside Front Headlamp aim too high (4.1.2 (a))
Nearside Front Position lamp light intensity obviously reduced (4.2.3 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Wiper blade slightly smearing
Offside Wiper blade slightly smearing
Spare tyre defective Flat ()
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Headlamp aim too high (4.1.2 (a))
Offside Front Lower Suspension rod ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Rear Service brake fluctuating, but not excessively both (1.2.1 (e))
n/s/f tyre outer wall cut
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Exhaust engine idle speed too high (7.3.D.1)
Child seat fitted not allowing full inspection of adult belt
How Reliable is the Kia Rio?
Based on 1,637,344 MOT tests across 141,212 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV10 ZNB is a 2010 Kia Rio in Black with a 1,399cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 59.1%.
Across all 2010 Kia Rio models, the average MOT pass rate is 74.8% with a typical mileage of 56,182 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Rio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 34,517 recorded failures. If you're considering buying BV10 ZNB, it's worth having these areas checked by a mechanic before committing.
The Kia Rio typically stays on UK roads for around 25 years. At 16 years old, this Kia Rio is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BV10 ZNB?
You can check the full history of BV10 ZNB by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV10 ZNB registered?
BV10 ZNB is a 2010 Kia Rio, first registered on 2 March 2010.
Is BV10 ZNB safe to buy?
The MOT history for BV10 ZNB shows 22 tests with a 59.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV10 ZNB have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV10 ZNB. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.