MOT Status
ExpiredMileage
175,455 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Power steering component has slight seepage from a component pipe (2.1.5 (a))
Power steering fluid level below minimum (2.1.5 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Front Track rod end ball joint has excessive play (2.1.3 (b) (i))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Power steering component has slight seepage from a component pipe (2.1.5 (a))
Power steering fluid level below minimum (2.1.5 (b) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Windscreen wiper missing (3.4 (a))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Direction indicator incorrect colour (4.4.3 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Hydraulic leak, but not excessive Powersteering pipe (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))
Offside Rear Upper Suspension component pin or bush slightly worn Shock absorber bush (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (3.5.1g)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Parking brake lever has little reserve travel (3.1.6b)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
crack in screen but not in drivers view
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Nearside Rear Shock absorber has an excessively worn bush (2.7.4)
Offside Front Seat belt stitching slightly frayed (5.2.2b)
Parking brake lever has little reserve travel (3.1.6b)
Power steering pipe(s) or hose(s) has slight seepage from a joint (2.3.3b)
crack in screen but not in drivers view
How Reliable is the Peugeot Bipper?
Based on 381,653 MOT tests across 31,026 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
BV12 DZE is a 2012 Peugeot Bipper in White with a 1,397cc diesel engine. This vehicle has been through 12 MOT tests with a personal pass rate of 66.7%.
Across all 2012 Peugeot Bipper models, the average MOT pass rate is 72.5% with a typical mileage of 77,306 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot Bipper fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 5,597 recorded failures. If you're considering buying BV12 DZE, it's worth having these areas checked by a mechanic before committing.
The Peugeot Bipper typically stays on UK roads for around 18 years. At 14 years old, this Peugeot Bipper is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of BV12 DZE?
You can check the full history of BV12 DZE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was BV12 DZE registered?
BV12 DZE is a 2012 Peugeot Bipper, first registered on 1 March 2012.
Is BV12 DZE safe to buy?
The MOT history for BV12 DZE shows 12 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does BV12 DZE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on BV12 DZE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.